Submissions from 2018
Net Zero Energy Houses with Dispatchable Solar PV Power Supported by Electric Water Heater and Battery Energy Storage, Huangjie Gong, Vandana Rallabandi, Dan M. Ionel, Donald G. Colliver, Shaun Duerr, and Cristinel Ababei
Power Electronics Powertrain Architectures for Hybrid and Solar Electric Airplanes with Distributed Propulsion, Damien Lawhorn, Vandana Rallabandi, and Dan M. Ionel
A Comparative Study of Constant Power Operation Techniques for Low Inductance Machines, Damien Lawhorn, Narges Taran, Vandana Rallabandi, and Dan M. Ionel
Hybrid PV-Wind, Micro-Grid Development Using Quasi-Z-Source Inverter Modeling and Control—Experimental Investigation, Neeraj Priyadarshi, Sanjeevikumar Padmanaban, Dan M. Ionel, Lucian Mihet-Popa, and Farooque Azam
Simulation Studies for a Multi-MW Hybrid Wind-Solar PV System for Desalination Plants, Vandana Rallabandi, Nasser Alawhali, Oluwaseun M. Akeyo, and Dan M. Ionel
Multi-Physics Modeling for Electric and Hybrid Vehicles with In-Wheel Electric Motors, Vandana Rallabandi, Damien Lawhorn, Dan M. Ionel, and Xiao Li
Optimal Design of a Switched Reluctance Motor With Magnetically Disconnected Rotor Modules Using a Design of Experiments Differential Evolution FEA-Based Method, Vandana Rallabandi, Jie Wu, Ping Zhou, David G. Dorrell, and Dan M. Ionel
Torque Production Capability of Axial Flux Machines with Single and Double Rotor Configurations, Narges Taran, Greg Heins, Vandana Rallabandi, Dean Patterson, and Dan M. Ionel
Two-Level Surrogate-Assisted Differential Evolution Multi-Objective Optimization of Electric Machines Using 3-D FEA, Narges Taran, Dan M. Ionel, and David G. Dorrell
Coreless and Conventional Axial Flux Permanent Magnet Motors for Solar Cars, Narges Taran, Vandana Rallabandi, Greg Heins, and Dan M. Ionel
Exploring the Efficiency and Cost Limits of Fractional hp Axial Flux PM Machine Designs, Narges Taran, Vandana Rallabandi, Greg Heins, and Dan M. Ionel
Transistor-Clamped Multilevel H-Bridge Inverter in Si and SiC Hybrid Configuration for High-Efficiency Photovoltaic Applications, Yibin Zhang, Jiangbiao He, Sanjeevikumar Padmanaban, and Dan M. Ionel
Submissions from 2017
Multi-MW Solar PV Pumping System with Capacity Modulation and Battery Voltage Support, Oluwaseun M. Akeyo, Vandana Rallabandi, and Dan M. Ionel
Multilayer Concentrated Windings for Axial Flux PM Machines, Vandana Rallabandi, Narges Taran, and Dan M. Ionel
Axial-Flux PM Synchronous Machines with Air-Gap Profiling and Very High Ratio of Spoke Rotor Poles to Stator Concentrated Coils, Vandana Rallabandi, Narges Taran, Dan M. Ionel, and Ion G. Boldea
MAGNUS--An Ultra-High Specific Torque PM Axial Flux Type Motor with Flux Focusing and Modulation, Vandana Rallabandi, Narges Taran, Dan M. Ionel, and Ion G. Boldea
Coreless Multidisc Axial Flux PM Machine with Carbon Nanotube Windings, Vandana Rallabandi, Narges Taran, Dan M. Ionel, and John F. Eastham
Inductance Testing According to the New IEEE Std 1812-Application and Possible Extensions for IPM Machines, Vandana Rallabandi, Narges Taran, Dan M. Ionel, and Ping Zhou
On the Effect of Design Tolerances on the Performance of Synchronous PM Machines Evaluated According to the IEEE Std 1812, Narges Taran, Vandana Rallabandi, Dan M. Ionel, and Ping Zhou
Submissions from 2016
Modeling of a Multi-Megawatt Grid Connected PV System with Integrated Batteries, Vandana Rallabandi, Oluwaseun M. Akeyo, and Dan M. Ionel
On the Feasibility of Carbon Nanotube Windings for Electrical Machines — Case Study for a Coreless Axial Flux Motor, Vandana Rallabandi, Narges Taran, Dan M. Ionel, and John F. Eastham
Large-Scale Optimization of Synchronous Reluctance Machines Using CE-FEA and Differential Evolution, Yi Wang, Dan M. Ionel, Vandana Rallabandi, Minjie Jiang, and Steven Stretz
