Submissions from 2019
Reduction of Amine Emissions from an Aqueous Amine Carbon Dioxide Capture System Using Charged Colloidal Gas Aphrons, Xiaobing Li, Jesse G. Thompson, and Kunlei Liu
Method of Increasing Mass Transfer Rate of Acid Gas Scrubbing Solvents, Joseph E. Remias, Cameron A. Lippert, and Kunlei Liu
Method of Development and Use of Catalyst-Functionalized Catalytic Particles to Increase the Mass Transfer Rate of Solvents Used in Acid Gas Cleanup, Leland R. Widger, Cameron A. Lippert, and Kunlei Liu
Submissions from 2016
Hybrid Process Using a Membrane to Enrich Flue Gas CO2 with a Solvent-Based Post-Combustion CO2 Capture System, Kunlei Liu, Reynolds A. Frimpong, and Kun Liu
Method for Energy Storage to Utilize Intermittent Renewable Energy and Low-Value Electricity for CO2 Capture and Utilization, Kunlei Liu, James Kyle Neathery, Joseph Eugene Remias, Cameron Anthony Lippert, and Nick Edward Holubowitch
Method of Increasing Mass Transfer Rate of Acid Gas Scrubbing Solvents, Joseph E. Remias, Cameron A. Lippert, and Kunlei Liu
Catalysts and Methods of Increasing Mass Transfer Rate of Acid Gas Scrubbing Solvents, Joseph E. Remias, Cameron A. Lippert, Kunlei Liu, Susan A. Odom, and Rachael Ann Burrows
Submissions from 2013
Method and Apparatus for Characterizing Microscale Formability of Thin Sheet Materials, Nasr A. Shuaib and Marwan K. Khraisheh
Submissions from 2012
Systems and Methods for Detecting Defects in Coatings Utilizing Color-Based Thermal Mismatch, Richard Alloo, Kozo Saito, Belal Gharaibeh, Keng Hoo Chuah, Nelson Kudzo Akafuah, and Ahmad Salaimeh
Fluid Scrubber and Spray Booth Including the Fluid Scrubber, Abraham J. Salazar
Submissions from 2011
Method and Apparatus for Characterizing Microscale Formability of Thin Sheet Materials, Nasr A. Shuaib and Marwan K. Khraisheh
Submissions from 2010
Uniaxially-Driven Controlled Biaxial Testing Fixture, Fadi K. Abu-Farha and Marwan K. Khraisheh
Plasma Actuator, Jamey D. Jacob
Submissions from 2009
Methods and Devices for Cryopreservation of Biological Cells and Tissues, Dayong Gao, Gary Van Zant, and XiangDong Cui
Device and Methods for Atomizing Fluids, Vedanth Srinivasan, Abraham J. Salazar, Kozo Saito, Richard Alloo, and Sakakibara Masahito
Programmable Multi-Dose Intranasal Drug Delivery Device, Daniel Wermeling, Ryan Vallance, Aravind Balasubramanian, Bruce L. Walcott, John A. Main, and James E. Lumpp
Submissions from 2006
Systems and Methods for Inspecting Coatings, Kozo Saito, Mohammed I. Hassan Ali, Akira Numasato, Mohammed A. Omar, Sakakibara Masahito, Suzuki Toshikazu, and Tanigawa Yasuo
Seal Assembly for Machinery Housing, Lyndon Scott Stephens and Kevin W. Kelly
Submissions from 2005
Method and Device for Removal of Cryoprotectant from Cryopreserved Biological Cells and Tissues, Dayong Gao and XiangDong Cui
Synthesis of Multi-Wall Carbon Nanotubes Using Unseeded Hydrocarbon Diffusion Flames, Kozo Saito, Forman A. Williams, Alvin S. Gordon, and Liming Yuang
System and Device for Characterizing Shape Memory Alloy Wires, Robert Ryan Vallance, Bruce L. Walcott, James E. Lumpp, Sumanth Chikkamaranahalli, Osamah A. Rawashdeh, and Eric Wolsing
Programmable Multi-Dose Intransal Drug Delivery Device, Daniel Wermeling, Ryan Vallance, Aravind Balasubramanian, Bruce L. Walcott, John Alan Main, and James E. Lumpp Jr.
Submissions from 2003
Processes for Nanomachining Using Carbon Nanotubes, Robert Ryan Vallance, Apparao M. Rao, and M. Pinar Mengüç
Submissions from 2001
Smart Material Control System and Related Method, John A. Main and George C. Nelson
Submissions from 1999
Triboelectric Separator with Mixing Chamber and Pre-Separator, John M. Stencel, John L. Schaefer, Heng Ban, James K. Neathery, and Tianxiang Li
