Submissions from 2016
Method of Increasing Mass Transfer Rate of Acid Gas Scrubbing Solvents, Joseph E. Remias, Cameron A. Lippert, and Kunlei Liu
Catalysts and Methods of Increasing Mass Transfer Rate of Acid Gas Scrubbing Solvents, Joseph E. Remias, Cameron A. Lippert, Kunlei Liu, Susan A. Odom, and Rachael Ann Burrows
Solvent and Method for Removal of an Acid Gas from a Fluid Stream, Joseph Eugene Remias, Cameron Anthony Lippert, and Kunlei Liu
Enhancement of Binding Characteristics for Production of an Agglomerated Product, Darrell Neal Taulbee and Robert Hodgen
Submissions from 2015
Fossil-Fuel-Fired Power Plant, Kunlei Liu and James K. Neathery
Contaminant-Tolerant Solvent and Stripping Chemical and Process for Using Same for Carbon Capture from Combustion Gases, Kunlei Liu, James K. Neathery, and Joseph E. Remias
Hybrid Cement Clinker and Cement Made from That Clinker, Thomas Robl, Tristana Y. Duvallet, Robert Rathbone, and Yongnin Zhou
Nitrogen Fertilizer Composition and Method to Improve Detection and Lessen the Explosive Potential of Nitrogen-Based Fertilizers, Darrell Neal Taulbee
Submissions from 2014
Method for Producing Fuel Briquettes from High Moisture Fine Coal or Blends of High Moisture Fine Coal and Biomass, Darrell Neal Taulbee
Lightweight Thermal Management Material for Enhancement of Through-Thickness Thermal Conductivity, Matthew Collins Weisenberger
Submissions from 2012
In-Situ Nanoparticle Formation in Polymer Clearcoats, Uschi M. Graham, Rajesh Khatri, and Burt H. Davis
Method for Removing CO2 from Coal-Fired Power Plant Flue Gas Using Ammonia as the Scrubbing Solution, with a Chemical Additive for Reducing NH3 Losses, Coupled with a Membrane for Concentrating the CO2 Stream to the Gas Stripper, Kunlei Liu, James K. Neathery, Joseph E. Remias, and Xiansen Li
Carbon Fiber Reinforced Carbon Foams for Repair and Reconstruction of Bone Defects, Brock Holston Marrs, Rodney Andrews, and Larry Cunningham Jr.
Submissions from 2011
Method for Hydraulically Separating Carbon and Classifying Coal Combustion Ash, Thomas L. Robl and John Groppo
Submissions from 2010
Particle Separation/Purification System, Diffuser and Related Methods, John M. Stencel and Tapiwa Zabron Gurupira
Reducing Explosive Potential of Ammonium Nitrate, Darrell Neal Taulbee
Submissions from 2009
Continuous Production of Aligned Carbon Nanotubes, David N. Jacques and Rodney Andrews
Submissions from 2008
Formation of Metal Oxide Nanowire Networks (Nanowebs) of Low-Melting Metals, Mahendra Sunkara, Shashank Sharma, Burt H. Davis, and Uschi M. Graham
Submissions from 2007
Process for the Continuous Production of Aligned Carbon Nanotubes, David N. Jacques and Rodney Andrews
Synthetic Fuel and Methods for Producing Synthetic Fuel, Darrell Neal Taulbee
Submissions from 2006
Particle Separation/Purification System, Diffuser and Related Methods, John M. Stencel and Tapiwa Zabron Gurupira
Submissions from 2005
Mixing and Dispersion of Nanotubes by Gas or Vapor Expansion, Francis J. Derbyshire, Rosemary Derbyshire, Rodney Andrews, and Bouchra Safadi
Carbon Fiber Filters, Marit Jagtoyen, Francis John Derbyshire, Rosemary Anne Alexander Derbyshire, Mario E. Tremblay, Steve G. Fishter, and Dimitris I. Collias
Polymethylmethacrylate Augmented with Carbon Nanotubes, David A. Pienkowski and Rodney J. Andrews
Submissions from 2004
Substituted Pentacenes and Electronic Devices Made with Substituted Pentacenes, John E. Anthony, David L. Eaton, and Sean Parkin
