Archived

This content is available here for research, reference, and/or recordkeeping.

Abstract

Creating a dependable approach for identifying both the mass of a shuttle car and how material is distributed in it removes the need for equipment operators to manually engage the flight chain. The quantification of environmental and installation conditions and the extent of influence considering their combined contribution towards inaccurate or exclusive measurements are to that degree limited. This experimental study investigated how two different strain transducers—installed in a force-shunt configuration—respond to thermo-mechanical loads when used to determine load distribution and position. Initial observations indicated that thermal effects at the installation site contributed to measurement inaccuracies or exclusive readings. The investigation quantified the impact of environmental and installation variables on measurement accuracy and found this influence to be indirectly linked to the mechanical properties of the substrate to which the strain transducers were mounted. Mounting bolt torque was determined to exert a negligible effect on strain measurement accuracy for the custom-built strain transducers. Nonetheless, both transducers failed to consistently return to the selected baseline at the start of experiments since thermal dependence persisted at the balanced state following the first cycle of loading. The research indicated that the custom-built force-shunt strain transducers are an effective means for mapping the profile and location of coal in shuttle cars, provided that the systems are subjected to continuous and cyclic rebalancing to maintain accuracy.

Document Type

Article

Publication Date

2026

Notes/Citation Information

© 2026 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.

Digital Object Identifier (DOI)

https://doi.org/10.3390/s26082374

Funding Information

This research was funded by the Alpha Foundation for the Improvement of Mine Safety and Health, Inc. (Alpha Foundation), grant number AFCINV24-10. The APC was waived. The views, opinions, and recommendations expressed herein are solely those of the authors and do not imply any endorsement by the Alpha Foundation, its directors, and staff.

Download

Share

COinS