Publication Date
1989
Description
In Czechoslovakia, the part of extensive used pastures on the slopes is covered by small shrubs and self-sown little trees. Their recultivation by bulldozer is very expensive and often makes erosion. Therefore the special self-propelled machine (MT6-01 l) with the commercial name Kabar-132 with adapter for clearing the grasslands of woods and partly arrange micro relief without damaging the turf was constructed. Special self-propelled machine has an automatic transversally equilibration of inclination to the horizontal level and hydrostatic driving mechanism with continuous driving regulation of speed from Oto 25 km per hour and it provides its high slope accessibility up to 25°. Working adapter (PB 2-201) has the rotor (1,500 revolvings per min.) with 48 hammers of about 2,3 kg weight. This machine with the working width of 2.4 m can destroy small shrubs and trees 3 m high with a diameter of 150 mm, the rocks with diameter of 150 mm and make even smooth the microrelief of the terrain. The machine went through the state testing (Grecenko, 1982) and is made in small series.
Citation
Pnacek, F and Javorkova, Anna, "Surface Recultivation Systems of Grasslands on the Slopes in Czechoslovakia" (2025). IGC Proceedings (1989-2023). 9.
https://uknowledge.uky.edu/igc/1989/session4b/9
Included in
Agricultural Science Commons, Agronomy and Crop Sciences Commons, Plant Biology Commons, Plant Pathology Commons, Soil Science Commons, Weed Science Commons
Surface Recultivation Systems of Grasslands on the Slopes in Czechoslovakia
In Czechoslovakia, the part of extensive used pastures on the slopes is covered by small shrubs and self-sown little trees. Their recultivation by bulldozer is very expensive and often makes erosion. Therefore the special self-propelled machine (MT6-01 l) with the commercial name Kabar-132 with adapter for clearing the grasslands of woods and partly arrange micro relief without damaging the turf was constructed. Special self-propelled machine has an automatic transversally equilibration of inclination to the horizontal level and hydrostatic driving mechanism with continuous driving regulation of speed from Oto 25 km per hour and it provides its high slope accessibility up to 25°. Working adapter (PB 2-201) has the rotor (1,500 revolvings per min.) with 48 hammers of about 2,3 kg weight. This machine with the working width of 2.4 m can destroy small shrubs and trees 3 m high with a diameter of 150 mm, the rocks with diameter of 150 mm and make even smooth the microrelief of the terrain. The machine went through the state testing (Grecenko, 1982) and is made in small series.
