Document Type

Article

Abstract

The feed coals, fly ashes and bottom ashes collected from seven different units in a major Brazilian PF power plant have been subjected to comprehensive mineralogical, geochemical, and petrographic studies, to investigate the links between feed coal and ash characteristics. Ashes from two of the units were collected while the coal was being co-fired with oil as part of the boiler start-up procedure, allowing the impact of oil co-firing on ash characteristics also to be evaluated. High proportions of unburnt carbon and high proportions of retained sulphur were found in the fly ashes produced during oil co-firing, probably reflecting less efficient combustion and associated lower combustion temperatures. Higher concentrations of a number of relatively volatile trace elements were also noted in these fly ashes, compared to the fly ashes collected from units under normal operating conditions. The fly ashes produced during oil co-firing gave rise to acid pH conditions in water-based leaching tests, in contrast to the alkaline pH associated with fly ashes produced during normal operations. This probably reflects higher SO3 contents relative to total CaO + MgO for the co-fired ash samples. Many trace elements that are typically mobilised as cations were also more abundant in leachates from the co-fired fly ashes. This is due, most likely, to the more acid pH conditions involved. Despite similar or even higher total concentrations, however, elements that are typically released from coal ash as oxy-anions were less mobile from the co-fired fly ashes than from the normally-fired fly ash materials.

First Page

51

Last Page

65

DOI

10.4177/CCGP-D-10-00005.1

Volume

2

Publication Date

1-1-2010

Share

COinS