Some posters were presented during the discussion of the intercalibration results and thus are not listed below.
Poster Session Listings
2011
Tuesday, March 1st
8:00 AM

Ablation and Drag Modeling for Reentry of a Blunt Body with Complex Geometry

Maria Gritsevich, Moscow State University, Russia

8:00 AM - 12:30 PM

An Inverse Parameter Estimation Methodology for the Analysis of Aeroheating and Thermal Protection System Experimental Data

Milad Mahzari, Georgia Institute of Technology
Ian Clark, Georgia Institute of Technology
Robert Braun, Georgia Institute of Technology
Ioana Cozmuta, NASA Ames Research Center

8:00 AM - 12:30 PM

Carbon-Phenolic-In-Air Chemistry Model for Atmospheric Re-Entry

Alexandre Martin, University of Kentucky
Iain D. Boyd, University of Michigan
Ioana Cozmuta, NASA Ames Research Center

8:00 AM - 12:30 PM

Catalysis and Oxidation of Copper Calorimeters – Are we Over-Testing Material Samples?

Jose Santos, Sierra Lobo Inc.
Anuscheh Nawaz, Sierra Lobo Inc.

8:00 AM - 12:30 PM

Computation of the TACOT Intercalibration Testcase for the 4th AFOSR/SNL/NASA Ablation Workshop using FABL

Jim Merrifield, Fluid Gravity Engineering Ltd., UK

8:00 AM - 12:30 PM

Experimental Support for Ablation Model Parameter Development and Solid State Thermal Decomposition

David R. Payne, Defence Science and Technology Laboratory, UK

8:00 AM - 12:30 PM

Extension of the PECOS Quasi-steady Ablation Toolkit for Uncertainty Propagation

Reed Anzalone, University of Texas at Austin
Rochan R. Upadhyay, University of Texas at Austin
Ofodike A. Ezekoye, University of Texas at Austin

8:00 AM - 12:30 PM

Feasibility of Ablation Measurements in Small Particle Hypervelocity Impact Range Facility

Alina Alexeenko, Purdue University
Marat Kulakhmetov, Purdue University
Mikhail Slipchenko, Purdue University
Steven Schneider, Purdue University
Jonathan Mihaly, California Institute of Technology
Marc Adams, California Institute of Technology
Ares Rosakis, California Institute of Technology

8:00 AM - 12:30 PM

Modeling Air-SiO2 Surface Catalysis under Hypersonic Conditions with ReaxFF Molecular Dynamics

Paul Norman, University of Minnesota
Thomas E. Schwartzentruber, University of Minnesota

8:00 AM - 12:30 PM

Modeling of Ablation Using the DSMC Method

Erin D. Farbar, University of Michigan
Iain D. Boyd, University of Michigan

8:00 AM - 12:30 PM

Modeling of Crack Propagation in AVCOAT, a Charring Ablator

E. Titov, Pennsylvania State University
R. Kumar, Pennsylvania State University
D. Levin, Pennsylvania State University

8:00 AM - 12:30 PM